Contact us
09 50 75 81 38service.commercial@cbs-emballages.comCBS Emballages
155 rue du Faubourg Saint-Denis
75010 Paris
Carton and pallet strapping
Polypropylene for cartons, PET for heavy pallets, steel for very heavy or aggressive loads. We tell you the width, thickness and core that fit your machine or hand tool.
The right strap depends on load weight, how it is applied and the tool. We supply all four.
The usual choice to close and bundle cartons. Flexible and light, applied by hand or in an automatic strapping machine. White, black or coloured to flag a customer or a flow.
The alternative to steel on pallets: it holds tension over time, does not rust and does not cut hands when unpacking. Green, as it is most often found.
For heavy, sharp or hot loads: metal, sawn timber, bricks, sections. Blued or galvanised, ribbon wound or oscillated coils.
Woven or composite polyester strap closed with a buckle. Handy on site or for export when there is no machine.
PP comes in white, black, blue, yellow, green or red. One colour per customer, dock or carrier: pickers know at a glance without reading the label.
The right strap badly tensioned will not hold. We suggest the tool that matches the material and the number of pallets per day.
Tensions steel strap before the seal is applied.
Crimps the seal onto steel strap in one move.
Open or closed, matched to strap width.
Tensions, seals and cuts with one tool. For moderate volumes.
For workshops strapping in series, on compressed air.
Tension and sealless joint at high throughput.
On a pallet, strapping holds the load instead of, or alongside, stretch film. Usually two straps one way, sometimes two the other. Tension is set for the load, not to the maximum.
| Load | Suggested material | Application |
|---|---|---|
| Cartons, light parcels | PP | Hand, semi or automatic machine |
| Mixed pallet, export | PET | Battery or manual tool |
| Metal, timber, building materials | Steel | Tensioner and sealer, or pneumatic |
| On site, no tools | Woven | Buckle by hand |
Exact widths, thicknesses and strengths: data to be supplied per reference. Send us your load and tool, we reply with the reference.
PET replaces steel in many cases: it holds tension, does not rust and is safe to cut. Steel remains the choice for sharp, very hot or hard edged loads.
It depends on your machine or dispenser. 200 mm is mostly for manual work, 406 mm for machines. Give us the model if you have it and we will check.
For manual work, yes, with a sealer. Battery tools weld PET by friction, no seal needed.
PP comes in several colours. Availability and minimums: data to be supplied.
Yes, on request. It keeps the coil off the floor and speeds up the job.
Tell us the strap type (PP, PET, steel, textile), width, quantity and your strapping tool.